MultiScanner® HD800 OneStep® multifunction stud finder locates the center and edges of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal targets up to 3 in. (75 mm) deep. A 3-mode switch makes it easy to change functions, while the back-lit display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

StudScan mode locates the center, edges, and direction of wood or metal studs up to ¾ in. (19 mm) deep
DeepScan® mode doubles the scanning depth to 1 ½ in. (38 mm)
WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (50 mm) deep in stud and metal scanning modes
Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 1 ½ in. (38 mm) deep, and ferrous metal, such as steel pipe, up to 3 in. (75 mm) deep
ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
Low battery indicator for optimum performance
Signal Strength indicator helps to distinguish between shallow and deep targets
SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud
Translucent base and illuminated “V” marker groove for more accurate marking of target location