Terminal crimping tool HT-H1440. AWG 20 - 26 (0.5 - 0.14 mm²)

Modular crimping tool for EZ RJ45 plugs

Terminal crimping tool HT-H1441. AWG 12 - 20 (4.0 - 0.5 mm²)

SDS Adapter for drill bit. ∅18x500mm

Adapter for drill bit SDS-plus for roof fasteners. L-800mm

Crimping Tool - AWG -19-26(UR). 22-26(UY). 19-26(UG)

Crimping Tool 19-26(UR) (UG) 22-26 (UY)

Cable Tie Fasten Tool HT-2082

Crimpling tool - RG59/RG58/RG62/RG6; (insert for - 5.41/6.50/1.73/8.23 mm)

HT-236M crimper(fame only); HT-236-6P. 236-8P. 236S 336Q. 236A.336F1. 336F2 screw driver

Cable Tie Fasten Tool (2.3-9.5 mm)

Crimpling tool (Ratchet type) - RG-59. RG-6. RG-62 ( insert for 6.48/8.20 mm)

Kit contains: HT-336C crimper HT-206 cutter HT-322 stripper

Cable Tie Fasten Tool HT-339

Crimpling tool ( Ratchet type) - LMR 400/RG8; insert for - 100*/2.54 mm. 359*/9.12 mm. 406*/10.3 mm

Kit contains full cycle ratchet crimp handle with five interchangeable dies covering all the most commonly used crimp sizes for both center contacts and connector ferrules. In addition a cable cutter

Crimpling tool (Ratchet type) RG-58/RG-6 (insert for 216*/5.48. 322*/8.22. 068*/1.72 mm)

Crimpling tool (Ratchet type) - RG213/RG11/RG6; (insert for 213*/2.54mm. 322*/8.20mm. 448*/11.4mm)

Ratchet Crimping Tool -DIN6/10/16mm². AWG10/8/7

Crimpling tool (Ratchet type) - RG213/RG11/RG6;( insert for - 100*/2.54 mm. 322*/8.20 mm. 476*/12.10 mm)

Crimpling tool (Ratchet type) - RG-6. RG 62;(insert for - 6.48/5.40/1.72 mm)

Ratchet Crimping Tool -DIN0.5/0.75/1.0/1.5/2.5/4 /6/10/16mm²AWG22/20/18/16/14/12/10/8/7

Crimpling tool (Ratchet type) - Twinax Conn (insert for - 076*/1.93 mm. 338*/8.60 mm)

Tool Krone110 terminal block

Insert for tool HT-336FM. RG58/6/62 (6.50/1.73/5.41 mm)

Insert for tool HT-336FM. RG59/ RG6 (255*/6.48mm. /8.13/8.89 mm )

Ratchet Crimping Tool -DIN0.75-1.5/2.5/4-6/10mm² AWG18-16/14/12-10/9

Ratchet Crimping Tool -DIN10/16/25mm². AWG8/6/5

Ratchet Crimping Tool -DIN0.5-1.0/1.5-2.5/4-6mm² AWG22-18/16-14/12-11

Cable Tie Fasten Tool HT-219

Screwdriver bit *+*. type PH2. L-25mm

Insert for tool HT-336FM. RG8/11/174/179/213 (2.54/3.25/10.90 mm)

Insert for tool HT-336FM. RG59/8. /62/6 (255*/6.48. 213*/5.41. 2.49/1.73/8.15mm )

Ratchet Crimping Tool -DIN0.5-1/1.5-2.5/4-6mm² AWG20-18/16-15

Ratchet Crimping Tool -DIN0.5-1/1.5-2.5/4-6mm²(W/LOCATOR)AWG0-18/16-14/12-11

SDS-plus drill bits aggressor for concrete ∅10 - 150/210mm

Cable pulling socks with loop 6-12mm. L-300mm

Krone LSA Insertion Tool with Sensor

LSA-Plus Tool with sensors

Tool type 110 (5 pairs)

Crimpling tool (ratchet - empty)

Blade - BIX TYPE / large type term. blocks (for tool HT-344KR)

Blade. Krone 110 terminal block (for tool HT-3444KR)

Instert JIS 1.25/2.0/5.5 mm²; AWG 22-18/16-14/12-10 for tool HT-336FM

Insert for tool HT- 336FM. DIN 0.5-1.0/1.5-2.5/4-6 mm²; AWG 22-18/16-14/12-10

Cable pulling socks with loop 12-18mm. L-600mm

1.Clamper 2. Stripping 22-10 AWG wire 3.Looping 3mm wire 4. Cutting Cu. A1 soft wire 5. Cutting bolt 4-40. 6-32. 8-32. 10-24. 10-32 (inchsize) 6. Cutting 3mm steel wire 7.Crimping ins. terminals 10-22

Cable pulling socks with loop 18-25mm. L-600mm