Terminal crimping tool HT-H1440. AWG 20 - 26 (0.5 - 0.14 mm²)

Modular crimping tool for EZ RJ45 plugs

Terminal crimping tool HT-H1441. AWG 12 - 20 (4.0 - 0.5 mm²)

Fiberglass fish tape with cage. Ø4.5mm. including set of 3 nozzles. (LxWxH) 47x17x59 cm. 30m

Crimping Tool - AWG -19-26(UR). 22-26(UY). 19-26(UG)

Fiberglass fish tape with cage. Ø4.5mm. including set of 3 nozzles. (LxWxH) 47x17x59 cm. 50m

Encased flat steel fish tape with a mini winder case. Ø6.3 x 0.8mm. 7.5m

Fiberglass fish tape with cage. Ø6mm. including set of 3 nozzles. (LxWxH) 57x18x76 cm. 150m

Encased fiberglass fish tape with winder case. Ø 3mm. 45m

Fiberglass fish tape with cage. Ø4.5mm. including set of 3 nozzles. (LxWxH) 47x17x59 cm. 100m

Punching trapezoidal decking sheet DBD. size 90 mm

Crimpling tool - RG59/RG58/RG62/RG6; (insert for - 5.41/6.50/1.73/8.23 mm)

Cable Tie Fasten Tool HT-2082

Crimping Tool 19-26(UR) (UG) 22-26 (UY)

Punching trapezoidal decking sheet DDB. size 33 mm

HT-236M crimper(fame only); HT-236-6P. 236-8P. 236S 336Q. 236A.336F1. 336F2 screw driver

Cable Tie Fasten Tool (2.3-9.5 mm)

Crimpling tool (Ratchet type) - RG-59. RG-6. RG-62 ( insert for 6.48/8.20 mm)

Kit contains: HT-336C crimper HT-206 cutter HT-322 stripper

Cable Tie Fasten Tool HT-339

Crimpling tool ( Ratchet type) - LMR 400/RG8; insert for - 100*/2.54 mm. 359*/9.12 mm. 406*/10.3 mm

AMP-BARREL Series. Insertion Tool for Pin contacts

Kit contains full cycle ratchet crimp handle with five interchangeable dies covering all the most commonly used crimp sizes for both center contacts and connector ferrules. In addition a cable cutter

Crimpling tool (Ratchet type) RG-58/RG-6 (insert for 216*/5.48. 322*/8.22. 068*/1.72 mm)